You are here: Home / News / Industry News / Angle Grinder Practice

Angle Grinder Practice

Views:75     Author:Site Editor     Publish Time: 2019-11-07      Origin:Site

1, should be carefully checked before use and determine whether they have the tools to use the conditions to prohibit tools to work sick.

2, the use of the environment dry, well-lit, can not be used in explosive areas.

3, according to the instructions in the use of tools, the proper use of tools. Replace the mill films using special tools to replace them.

4, the operator labor wear range, should bring rubber gloves and non-slip boots outdoor work.

5, the workpiece should be fixed well.

6, when used continuously as a discovery tool overheating (cabinet of more than 70 ℃) should be suspended, add oil until the check that no fault can continue to use.

7, regularly check electrical connection wire, if it is damaged, replace it immediately.

8, use an extension cord, use a dedicated mobile power with leakage protection, and manual tests.

9, the tool when not in use or maintenance, replacement mill films, disconnect the power supply.

10, maintain a high degree of attention when the operation is prohibited fatigue when using the tool.

11, according to the manual's contents regular tool maintenance tool.

Tel: 0086-579-87566667
Fax: 0086-579-87566687
Andy: 0086 13858902892(WhatsApp/We chat) 

No.68,Tengfei Road, Xiangzhu Idustrial Area, Yongkang City, Zhejiang Province


Quick Link

YONGKANG XIAOCHENG ELECTRIC APPLIANCE CO., LTD.     One of the professional power tools manufacturers  , which located in Yongkang, the hardware center of China. We have more than 10 years’ experience in R&D, and our major products are angle grinder, electric drill, impact drill, electric blower, trimmer and hammer drill. READ MORE>>

 Copyrights 2019 MAKUTE All rights reserved. Technology by www.leadong.comSitemap